Description
The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor signals to the monitor modules in a 3500 rack. The module receives input signals from proximity probes or magnetic pickups and converts the signals to digital Keyphasor signals that indicate when the Keyphasor mark on the shaft coincides with the Keyphasor transducer. The 3500 Machinery Protection System can accept up to four Keyphasor signals for normal configuration and up to eight Keyphasor signals in a paired configuration.
Keyphasor signal is a once-per-turn or multiple event-per-turn pulse from a rotating shaft or gear used to provide a precise timing measurement. This allows 3500 monitor modules and external diagnostic equipment to measure shaft rotative speed and vector parameters such as 1X vibration amplitude and phase.
The Enhanced Keyphasor Module is an improved 3500 system module. It offers expanded Keyphasor signal processing capabilities over the previous design while maintaining complete downward-compatibility in terms of form, fit and function with existing Keyphasor modules for use in legacy systems. The Keyphasor module, PWA 125792-01, is completely replaced by the updated 149369-01 module.
When a system Keyphasor input is required for Triple Modular Redundant (TMR) applications, the 3500 system should employ two Keyphasor modules. In this configuration, the modules work in parallel to provide both a primary and secondary Keyphasor signal to the other modules in the rack.
A system with more than four Keyphasor inputs may use a paired configuration provided there are no more than four 3500/25 Enhanced Keyphasor Module Bently Nevada Machinery Condition Monitoring 141532 Rev. Tprimary Keyphasor input signals. A paired configuration requires two consecutive monitoring positions in either the upper/lower or both half-slot positions. Four Keyphasor modules will accept four primary and four backup input channels and provide four output channels (one per module). A configuration of two paired and one non-paired (three Keyphasor modules total) is also possible. In such a configuration, the user may configure the one non-paired Keyphasor (order either two 2-channel or one 1-channel and one 2- channel option)
The Isolated Keyphasor I/O module is designed for applications where the Keyphasor signals are tied in parallel to multiple devices and require isolation from other systems, such as a control system. The Isolated I/O module was created specifically for Magnetic Pickup applications but is compatible with and will provide isolation for Proximitor* applications as long as an external power supply is provided.
The intent of this I/O module was primarily to measure shaft speed and not phase. The module can provide phase measurements, but this I/O introduces a slightly higher phase shift than the Non-Isolated I/O version. Figure 1 shows the amount of phase shift that the Isolated I/O modules will add at different machine speeds.
Enhanced product features include generation of once-per-turn event signals from multi event-per-turn inputs, field-upgradeable firmware, and asset management data reporting.
Enhanced Keyphasor Module
3500/25-AA-BB-CC
A: Number of channels
01 Single half-height 2-channel Keyphasor card (order for 2-channels)
02 Two half-height 2-channel Keyphasor cards (order for 4-Channels)
B: Type of I/O Module
01 I/O module with Internal Terminations
02 I/O module with External Terminations
03 Internal Barrier I/O with Internal Terminations
04 Isolated I/O module with Internal Terminations (Designed for use with Magnetic Pickups)
05 Isolated I/O module with External Terminations (Designed for use with Magnetic Pickups)
C: Agency Approval Option
00 Not required
01 CSA/NRTL/C (Class 1, Div 2)
02 ATEX/IECEx/CSA (Class 1 Zone 2)
Spares
149369-01 Enhanced Keyphasor Module
This module may be ordered as a direct plug-in replacement for Keyphasor Module 125792-01.
125800-01 Keyphasor I/O Module (Internal Terminations)
126648-01 Keyphasor I/O Module (External Terminations)
125800-02 Isolated Keyphasor I/O Module (Internal Terminations) (Designed for use with Magnetic Pickups)
126648-02 Isolated Keyphasor I/O Module (External Terminations) (Designed for use with Magnetic Pickups)
135473-01 Keyphasor I/O Module (Internal Barriers and Internal Terminations.
04425545 Grounding Wrist Strap (single use)
00580438 Connector Termination, Header, Internal 4-Position, Green
00502133 Connector Header, Internal Termination, 12-Position, Blu
129770 Keyphasor Module User Guide
Half-height Blank Monitor Cover Kit
131151-01 Half-height Blank Front PanelCover (qty 1, includes screws)
Half-height Card Adapter
125388-01 Half-height Chassis
125565-01 Card Guide
04300111 Assembly Screws (Order Qty. 3) 
